Electroplating power high-frequency characteristics

One, closed water cooling structure, excellent corrosion, rust, moisture effects, greatly extended service life. Tungsten copper alloy air cooling structure, mild antiseptic, easy to install, simple maintenance.
Second, a significant saving, saving 10% -30%, more than 85% efficiency
Third, all undergo rigorous testing before leaving factory equipment and long aging test, day and night at full capacity, high current continuous uninterrupted operation, the real durable and reliable!
Four, small size, light weight, simple operation, convenient installation and maintenance
Fifth, the protection function, with phase, overcurrent, overvoltage, short circuit, overheat protection function;
Six, current, voltage and working time digital display
Seven, working time control functions, fast protection and automatic shutdown function
VIII. Constant voltage, constant current control options, · high power factor, pollution on the grid, without interference;
Nine, Case Material: reinforced PVC sheet, anti-acid, anti-corrosion, aluminum alloy body production, increase the power of the life in harsh environments.he thickness of the coating will be affected. If the coating is thin, the coating will not affect the cleaning, just pay attention to careful and thorough cleaning. Sometimes when dry washed oozing check the pH of the water or salts, can also be a general understanding of whether or not thoroughly cleaned.
If the coating is thick plating speed, sealing can often play a role. Many problems intermediate thickness of the coating. Because the coating is often incomplete in the opening portion is formed in the bridge. This architecture makes cleaning particularly difficult.
Currently popular approach is to porous resin parts such as powder products, or some of the melted wax compounds the hole closed. With pore-filling method to avoid the problems caused by not thoroughly cleaned, while selecting the electroplating process used to try to avoid a solution containing corrosive or corrosive media promotion, such as avoiding a solution of chloride ions and other substances.
To fill the hole shall be filled with a high temperature before baking to remove fumes, so you can remove the oil remaining in the hole to help the sealant to enter and combine divisible dip resin closed after oil, vacuum filling effect than simply soaking better. General product used zinc stearate soaked in 150-180 degrees, sealing effect is also good, but the plating process should avoid using strong acid to prevent the closure material dissolved.