Why ask after such a long salt spray test it?

In the case of guaranteed plating thickness, in order to ensure a certain degree of corrosion resistance, aging resistance function, but also to ensure that the use life.Now the domestic Molybdenum tube, some of which appeared as propaganda, what four electroplating, plating six or vacuum plating, electroplating of speaking of space, the plating exaggerate, divorced from reality, the purpose is to make consumers think that is good products. In fact, these claims are not professional, not unfounded. Vacuum plating have, but not suitable for use in copper plating on surface, generally used in plastic plating, or a PVD surface coating.
There is what 10 GB plating standard, in fact, the 10 national standards plating only the most basic, is less than 10, it is a failure of electroplating products, 10 but only just entered the qualifying threshold. That is a 24-hour national standard GB18145 acid salt spray test.
Three: Finally a thermal shock test is the test, according to the principle of thermal expansion and contraction, between the high and low temperatures through the cycle, to test the plating surface adhesion, sanitary products will not always guarantee future peeling, bubbles and other phenomena .
2011, Eyck Valor (Aqualem) Bathroom For exports to the EU, after sending samples to the global authoritative third-party testing agency SGS, got the highest industry standards eN248 plating test reports, test the rigor of its entire testing process from the point of view out by such a test can be drawn in two years the number of days the coast, or eight days of exposure to the natural environment of any natural environment to molybdenum plating good surface plating effect. Finally on hardware maintenance knowledge of sanitary products: bath Eyck Valor AQUALEM remind consumers to use products in the process: try to avoid the use of acidic or alkaline substances to maintenance, such as using washing powder, detergent will be on tap (faucet what brand good?) produce damage. Correct maintenance method is to use water to get rid of surface stains on it.