Molybdenum rod

1, the appearance of forging molybdenum plating nd polished molybdenum rod. Forging molybdenum rod surface is allowed and slightly oxidized Mo wrought traces, polished molybdenum rod surface is metallic luster, no significant oxidation.
2, grade according to chemical composition and for different purposes into GMPM. A 1G MHLM. A 2, GMHYM. One three three grades.
3, uses
GMPM. - 1 for the manufacture of electric vacuum parts, guide rods, electrodes, export lines, the heating electronic components. GMHI. M, 2, GMHYM. A 3 for the manufacture of tubes, electric light pinout strut, side rod, wire and so on.
4, specifications and tolerances forged polished molybdenum rod mm molybdenum rod
  0 5 ≤ d (0 8 ± 0 02
  0 8 ≤ d (2 5 ± 0 03
  2 5 ≤ d (5 0 ± 2% ± 01
  5 0 ≤ d <8 0 ± 01 5
  8 0 ≤ d (1 6 0 ± 0 2
5, the chemical composition according to the national standard GB, T3462-2007 "molybdenum andMolybdenum tube" of the relevant technical requirements of execution.
Main features indicators are as follows:
     Trademark
Index Name GMPM. A 1 GMHLM. A 2 GMHYM. A three
Main content set M. % ≥ 99 90 ≥ 99 45 ≥ 99 45
RE% one hundred eleven 01-0501-05
Impurities total% (01 (005 (005
W% ≤ 0 01 ≤ 0 01 ≤ 0 01
Each other impurity elements% ≤ 0 005 ≤ 0 005 ≤ 0 005
GMHI. M. A 2, GMHYM. 3 is a rare high-temperature lanthanum, yttrium molybdenum, rare earth impurities without interest.
6, packing each beam molybdenum rod by the same brand, batch number and specifications of molybdenum rods. With plastic or soft metal wire rope tied at 3-5. Outsourcing moisture-proof paper and then placed in isolation foam board or cardboard boxes inside. If you have special requirements determined through mutual consultation.
7, molybdenum rod storage in transit should prevent damp, not violent collision. Product should be stored dry ventilated, dry and free acid atmosphere place to prevent oxidation, storage period should not exceed six months.